Save 7%
SHOEI NXR RUMPUS TC-1
SHOEI NXR RUMPUS TC-1SHOEI NXR RUMPUS TC-1SHOEI NXR RUMPUS TC-1

SHOEI NXR RUMPUS TC-1

Availability: In Stock

$819.00 $879.90

Size

Colour

loading
  • Compact - Lightweight - Aerodynamic Design: Shoei's state-of-the-art wind tunnel at their Ibaraki Factory was the key to the NXR Helmet Design Process. Thanks to the time spent in the wind tunnel the NXR sports a more compact and aerodynamic shell than the XR-1100 and is the lightest Snell Certified Helmet in the Shoei Line as of it's introduction.
  • Ventilation Performance: Using the Shoei Wind Tunnel the optimal balance of ventilation and noise was identified. Using this knowledge Shoei Engineers equipped the NXR with a large, three position lower vent shutter for ease of use with gloves, three upper vents for optimal air intake, and four upper exhaust vents too take full advantage of negative pressure suction. The end result is dramatically improved cool air intake and hot air expulsion.
  • Precision QR-E Base Plate System: The NXR's all-new QR-E base plate system facilitates quicker shield changes than ever before. Once a shield is installed, the strengthened spring-loaded base plates pull the shield back against the dual-lip, dual-layered window beading to ensure a wind and waterproof seal. Add to the mix an all-new five-stage rotating dial that allows fine-tuning the base plate's position easily and accurately.
  • Multi-Ply Matrix AIM+ Shell: The NXR features the SHOEI Multi-Ply Matrix AIM+ Shell construction. Combining fiberglass with organic fibers, the NXR proprietary AIM+ Shell is not only strong, it is extremely lightweight, and comes in an industry-leading four shell sizes to ensure a custom fit for heads between the sizes of XS-XXL.
  • Dual-Layer / Multi-Density EPS Liner: Dual-Layer, Multi-Density EPS liner not only provides enhanced impact absorption by utilizing varying densities of foam in key areas around the riders head, it is also designed to allow cooling air to travel unrestricted through tunnels created in the EPS, further enhancing the NXR's superior ventilation. In addition to enhanced impact absorption and ventilation, the precision placement of multi-density EPS liner material yields a more compact, lightweight design.
  • 3D Max-Dry System II Interior: Fully removable, washable, adjustable, and replaceable 3D Max-Dry System II interior. The 3D center pad is three-dimensionally shaped to match the contours of a rider's head, allowing for an extremely comfortable fit while maintaining the firm hold necessary for distraction-free, high-speed riding. Additionally, the NXR's 3D-shaped cheek pads are available in multiple sizes for a customizable fit, and SHOEI's Max-Dry System II liner material absorbs and dissipates sweat and moisture twice as fast as traditional Nylon helmet interiors.
  • Emergency Quick Release System (E.Q.R.S.): SHOEI equipped the NXR Helmet with its exclusive Emergency Quick Release System (technology borrowed from The Shoei X-Twelve Helmet) that allows emergency medical personnel to easily remove the cheek pads from an injured rider's helmet. When the cheek pads have been removed, the helmet can be safely lifted from a rider's head without creating unnecessary strain in the neck area.

Helmet size chart

Riding gear size chart

sizeguide

Glove size chart

sizeguide3

Please Note

AMX Superstores sources a wide variety of products from authorised wholesalers Australia-wide. These products are mostly imported from many different manufacturers worldwide, therefore, there is no standard size and sizes do vary from manufacturer to manufacturer.

AMX Superstores will be happy to assist and offer general advice on sizing. However, selecting sizes is solely the Customer’s responsibility.

If for any reason, you are not satisfied with your purchase, you may return (at the expense of the Customer) the unused product(s) within 7 days of delivery, for an exchange or refund of the price of the product(s) only.

Customers who take advantage of the AMX Superstores free freight offer for orders over $99 and wish to return a product or products for a refund may incur a 10% re-stocking fee.

The product must be accompanied with the original receipt, be un-used, in its complete and original packaging and must NOT be:

  • Damaged
  • A Clearance/Sale item, or
  • A Special Order

AMX Superstores must be contacted before any product is to be returned, at which point a return authorisation will be provided. Product will not be accepted at AMX Superstores without an return authorisation.

AMX Superstores will not accept return freight charges.

Please note: Customers will be responsible for all postage costs incurred with returning any items for exchange or warranty.

  • 6D
  • Dragon
  • DRC
  • Fly Racing
  • HJC
  • MAXIMA
  • Shoei
  • Sidi
  • Thor
  • USWE
  • Zeta

Shop 3/550 South Gippsland Hwy

Lynbrook

(03) 8787 8700

Shop 5 / 477 Dorset Road

Bayswater

Phone: (03) 9729 8000

336 Cooper St

Epping

(03) 9401 5411

Shop 3/31 Keilor Park Dr

Keilor Park

(03) 9331 5050

356 Main North Road

Blair Athol

08-8447-3859

3385 Pacific Highway

Springwood

(07) 3442 8999

OPEN 7 DAYS A WEEK